Newer
Older
% \file{style/mu/fithesis-med.sty}
% This is the style file for the theses written at the Faculty of
% Medicine at the Masaryk University in Brno. It has been prepared
% in accordance with the formal requirements published at the
% website of the Department of Optometry and Orthoptics\footnote^^A
% {See \url{http://is.muni.cz/do/med/zpravyprac/Optometrie/NALE^^A
% ZITOSTI_ZAVERECNE_PRACE.doc}}.
% \begin{macrocode}
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{fithesis/style/mu/fithesis-med}[2018/02/11]
% The file defines the color scheme of the respective faculty. Note
% the the color definitions are in RGB, which makes the resulting
% files generally unsuitable for printing.
% \begin{macrocode}
links={HTML}{F58E76},
tableEmph={HTML}{FF9D85},
tableOdd={HTML}{FFF5F6},
tableEven={HTML}{FFDEDF}}
% \end{macrocode}
% The bibliography support is enabled. The |authoryear| citations
% are used and the bibliography is sorted by year, name, and title.
% \begin{macrocode}
\thesis@bibliography@setup{%
style=iso-authoryear,
sorting=ynt}
\thesis@bibliography@load
% \end{macrocode}
% The file loads the following packages:
% \begin{itemize}
% \item\textsf{tikz} -- Used for dimension arithmetic.
% \item\textsf{geometry} -- Allows for modifications of the type
% area dimensions.
% \item\textsf{setspace} -- Allows for line height modifications.
% \end{itemize}
% In addition to this, the type area width is set to
% 16\,cm in accordance with the formal requirements of the faculty.
% This leads to overfull lines and is against the good conscience
% of the author of this style.
% \begin{macrocode}
\thesis@require{tikz}
\thesis@require{geometry}
\thesis@require{setspace}
\geometry{top=25mm,bottom=20mm,left=25mm,right=25mm,includeheadfoot}
% \end{macrocode}
% \begin{macro}{\thesis@blocks@cover}
% The |\thesis@blocks@cover| macro typesets the thesis
% cover.
% \begin{macrocode}
\def\thesis@blocks@cover{%
\ifthesis@cover@
\thesis@blocks@clear
\begin{alwayssingle}
\thispagestyle{empty}
\begin{center}
{\sc\thesis@titlePage@LARGE\thesis@@{universityName}\\%
\thesis@titlePage@Large\thesis@@{facultyName}\\}
\vfill
{\bf\thesis@titlePage@Huge\thesis@@{typeName}}
\vfill
{\thesis@titlePage@large\thesis@place
\ \thesis@year\hfill\thesis@author}
\end{center}
\end{alwayssingle}
\fi}
% \end{macro}
% The style file redefines the title page content
% not to include the author's name and the title page footer
% to include both the author's and advisor's name, the field of
% study and the semester and place of the thesis defense in
% accordance with the requirements of the department.
% \begin{macrocode}
\def\thesis@blocks@titlePage@content{%
{\thesis@titlePage@Huge\bf\thesis@TeXtitle\\[0.3in]}%
{\thesis@titlePage@large{\sc\thesis@@{typeName}}\\}}
\def\thesis@blocks@titlePage@footer{%
{\thesis@titlePage@large
{% Calculate the width of the thesis author and advisor boxes
\let\@A\relax\newlength{\@A}\settowidth{\@A}{{%
\bf\thesis@@{advisorTitle}:}}
\let\@B\relax\newlength{\@B}\settowidth{\@B}{\thesis@advisor}
\let\@C\relax\newlength{\@C}\settowidth{\@C}{{%
\bf\thesis@@{authorTitle}:}}
\let\@D\relax\newlength{\@D}\settowidth{\@D}{\thesis@author}
\let\@E\relax\newlength{\@E}\settowidth{\@E}{{%
\let\@F\relax\newlength{\@F}\settowidth{\@F}{\thesis@field@name}
\let\@left\relax\newlength{\@left}\pgfmathsetlength{\@left}{%
max(\@A,\@B)}
\let\@right\relax\newlength{\@right}\pgfmathsetlength{\@right}{%
max(\@C,\@D,\@E,\@F)}
% \end{macrocode}
% \changes{v0.3.49}{2018/02/11}{Removed an extraneous \cs{vskip} in
% the style files for the Masaryk University in Brno. [VN]}
% \begin{macrocode}
% Typeset the thesis author and advisor boxes
\begin{minipage}[t]{\@left}
{\bf\thesis@@{advisorTitle}:}\\\thesis@advisor
\end{minipage}\hfill\begin{minipage}[t]{\@right}
{\bf\thesis@@{authorTitle}:}\\\thesis@author
\\[1em]{\bf\thesis@@{fieldTitle}:}\\\thesis@field@name
\end{minipage}}\\[4em]\thesis@place, \thesis@@{semester}}}
% \begin{macro}{\thesis@blocks@frontMatter}
% The |\thesis@blocks@frontMatter| macro sets up the style of the
% front matter of the thesis. The page numbering is arabic in
% accordance with the formal requirements and it is hidden. In case
% of double-sided typesetting, the geometry is altered according to
% the requirements of the faculty.
% \begin{macrocode}
\def\thesis@blocks@frontMatter{%
\thesis@blocks@clear
% In case of double-sided typesetting, change the geometry
\ifthesis@twoside@
right=15mm, includeheadfoot}
\fi\pagestyle{empty}
\parindent 1.5em
\setcounter{page}{1}
\pagenumbering{roman}}
% \end{macro}\begin{macro}{\thesis@blocks@mainMatter}
% The |\thesis@blocks@mainMatter| macro sets up the style
% of the main matter of the thesis. The leading is adjusted in
% accordance with the requirements of the faculty.
% \begin{macrocode}
\def\thesis@blocks@mainMatter{%
\thesis@blocks@clear
% In case of double-sided typesetting, change the geometry
\ifthesis@twoside@
\newgeometry{top=25mm,bottom=20mm,left=35mm,
right=15mm, includeheadfoot}
\fi\setcounter{page}{1}
\pagenumbering{arabic}
\pagestyle{thesisheadings}
\parindent 1.5em
\onehalfspacing}
% \end{macrocode}
% Note that there is no direct support for the seminar paper and
% thesis proposal types. If you would like to change the contents
% of the preamble and the postamble, you should modify the
% |\thesis@blocks@preamble| and |\thesis@blocks@postamble| macros.
%
% All blocks within the autolayout preamble and postamble that are
% not defined within this file are defined in the
% \texttt{style/mu/fithesis-base.sty} file.
\thesis@blocks@coverMatter
\thesis@blocks@cover
\thesis@blocks@frontMatter
\thesis@blocks@titlePage
\onehalfspacing
\thesis@blocks@clearRight
\thesis@blocks@abstract
\thesis@blocks@abstractEn
\thesis@blocks@keywords
\thesis@blocks@keywordsEn
\thesis@blocks@bibEntry
\thesis@blocks@declaration
\thesis@blocks@thanks
\thesis@blocks@tables}
\def\thesis@blocks@postamble{%
\thesis@blocks@bibliography}