From f8058a28c19de8c926a2a1e66f57953d63f1a3bf Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?V=C3=ADt=20Novotn=C3=BD?= <witiko@mail.muni.cz>
Date: Fri, 13 Nov 2020 11:41:48 +0100
Subject: [PATCH] Show lightweight markup earlier in examples, show tables
---
example/mu/example.dtx | 330 +++++++++++++++++++++--------------------
1 file changed, 170 insertions(+), 160 deletions(-)
diff --git a/example/mu/example.dtx b/example/mu/example.dtx
index 637ccec..ce221b2 100644
--- a/example/mu/example.dtx
+++ b/example/mu/example.dtx
@@ -526,6 +526,176 @@ alles gut geht, bekomme ich bald ein Diplom. WĂĽnsch mir GlĂĽck!
}\end{otherlanguage}
%</pdftex>
+\chapter{Using lightweight markup}
+%<*pdftex>
+\shorthandoff{-}
+%</pdftex>
+\begin{markdown*}{%
+ hybrid,
+ definitionLists,
+ footnotes,
+ inlineFootnotes,
+ hashEnumerators,
+ fencedCode,
+ citations,
+ citationNbsps,
+ pipeTables,
+ tableCaptions,
+}
+
+If you decide that \LaTeX{} is too wordy for some parts of your
+document, there are [packages](https://www.ctan.org/pkg/markdown
+"Markdown") that allow you to use more lightweight markup next
+to it.
+
+ 
+
+| Right | Left | Default | Center |
+|------:|:-----|---------|:------:|
+| 12 | 12 | 12 | 12 |
+| 123 | 123 | 123 | 123 |
+| 1 | 1 | 1 | 1 |
+
+: This is a table with different types of alignment.
+
+This is a bullet list. Unlike numbered lists, bulleted lists
+contain an **unordered** set of bullet points. When a bullet point
+contains multiple paragraphs, the list is typeset as follows:
+
+ * The first item of a bullet list
+
+ that spans several paragraphs,
+ * the second item of a bullet list,
+ * the third item of a bullet list.
+
+When none of the bullet points contains multiple paragraphs, the
+list has a more compact form:
+
+ * The first item of a bullet list,
+ * the second item of a bullet list,
+ * the third item of a bullet list.
+
+Unlike a bulleted list, a numbered list implies chronology or
+ordering of the bullet points. When a bullet point
+contains multiple paragraphs, the list is typeset as follows:
+
+ 1. The first item of an ordered list
+
+ that spans several paragraphs,
+ 2. the second item of an ordered list,
+ 3. the third item of an ordered list.
+ #. If you are feeling lazy,
+ #. you can use hash enumerators as well.
+
+When none of the bullet points contains multiple paragraphs, the
+list has a more compact form:
+
+ 6. The first item of an ordered list,
+ 7. the second item of an ordered list,
+ 8. the third item of an ordered list.
+
+Definition lists are used to provide definitions of terms. When
+a definition contains multiple paragraphs, the list is typeset
+as follows:
+
+Term 1
+
+: Definition 1
+
+*Term 2*
+
+: Definition 2
+
+ Some code, part of Definition 2
+
+ Third paragraph of Definition 2.
+
+When none of the bullet points contains multiple paragraphs, the
+list has a more compact form:
+
+Term 1
+: Definition 1
+*Term 2*
+: Definition 2
+
+Block quotations are used to include an excerpt from an external
+document in way that visually clearly separates the excerpt from
+the rest of the work:
+
+> This is the first level of quoting.
+>
+> > This is nested blockquote.
+>
+> Back to the first level.
+
+Footnotes are used to include additional information to the
+document that are not necessary for the understanding of the main
+text. Here is a footnote reference^[Here is the footnote.] and
+another.[^longnote]
+
+[^longnote]: Here's one with multiple blocks.
+
+ Subsequent paragraphs are indented to show that they
+belong to the previous footnote.
+
+ Some code
+
+ The whole paragraph can be indented, or just the first
+ line. In this way, multi-paragraph footnotes work like
+ multi-paragraph list items.
+
+Citations are used to provide bibliographical references to other
+documents. This is a regular citation~[@borgman03, p. 123]. This is
+an in-text citation: @borgman03\. You can also cite several authors
+at once using both regular~[see @borgman03, p. 123; @greenberg98,
+sec. 3.2; and @thanh01] and in-text citations: @borgman03 [p.123;
+@greenberg98, sec. 3.2; @thanh01].
+
+Code blocks are used to include source code listings into the
+document:
+
+ #include <stdio.h>
+ #include <unistd.h>
+ #include <sys/types.h>
+ #include <sys/wait.h>
+ // This is a comment
+ int main(int argc, char **argv)
+ {
+ while (--c > 1 && !fork());
+ sleep(c = atoi(v[c]));
+ printf("%d\n", c);
+ wait(0);
+ return 0;
+ }
+
+There is an alternative syntax for code blocks that allows you to
+specify additional information, such as the language of the source
+code. This information can be used for syntax highlighting:
+
+``` sh
+#!/bin/sh
+fac() {
+ if [ "$1" -leq 1 ]; then
+ echo 1
+ else
+ echo $(("$1" * fac $(("$1" - 1))))
+ fi
+}
+``````````````
+
+~~~~~~ Ruby
+# Here's a way to empty an array.
+joe = [ 'eggs.', 'some', 'break', 'to', 'Have' ]
+print(joe.pop, " ") while joe.size > 0
+print "\n"
+~~~~~~
+
+\end{markdown*}
+%<*pdftex>
+\shorthandon{-}
+%</pdftex>
+
\chapter{These are}
\section{the available}
\subsection{sectioning}
@@ -824,166 +994,6 @@ fonts will become available: \[
See \url{http://tex.stackexchange.com/a/58124/70941}.
}.
-\chapter{Using lightweight markup}
-%<*pdftex>
-\shorthandoff{-}
-%</pdftex>
-\begin{markdown*}{%
- hybrid,
- definitionLists,
- footnotes,
- inlineFootnotes,
- hashEnumerators,
- fencedCode,
- citations,
- citationNbsps,
-}
-
-If you decide that \LaTeX{} is too wordy for some parts of your
-document, there are [packages](https://www.ctan.org/pkg/markdown
-"Markdown") that allow you to use more lightweight markup next
-to it.
-
- 
-
-This is a bullet list. Unlike numbered lists, bulleted lists
-contain an **unordered** set of bullet points. When a bullet point
-contains multiple paragraphs, the list is typeset as follows:
-
- * The first item of a bullet list
-
- that spans several paragraphs,
- * the second item of a bullet list,
- * the third item of a bullet list.
-
-When none of the bullet points contains multiple paragraphs, the
-list has a more compact form:
-
- * The first item of a bullet list,
- * the second item of a bullet list,
- * the third item of a bullet list.
-
-Unlike a bulleted list, a numbered list implies chronology or
-ordering of the bullet points. When a bullet point
-contains multiple paragraphs, the list is typeset as follows:
-
- 1. The first item of an ordered list
-
- that spans several paragraphs,
- 2. the second item of an ordered list,
- 3. the third item of an ordered list.
- #. If you are feeling lazy,
- #. you can use hash enumerators as well.
-
-When none of the bullet points contains multiple paragraphs, the
-list has a more compact form:
-
- 6. The first item of an ordered list,
- 7. the second item of an ordered list,
- 8. the third item of an ordered list.
-
-Definition lists are used to provide definitions of terms. When
-a definition contains multiple paragraphs, the list is typeset
-as follows:
-
-Term 1
-
-: Definition 1
-
-*Term 2*
-
-: Definition 2
-
- Some code, part of Definition 2
-
- Third paragraph of Definition 2.
-
-When none of the bullet points contains multiple paragraphs, the
-list has a more compact form:
-
-Term 1
-: Definition 1
-*Term 2*
-: Definition 2
-
-Block quotations are used to include an excerpt from an external
-document in way that visually clearly separates the excerpt from
-the rest of the work:
-
-> This is the first level of quoting.
->
-> > This is nested blockquote.
->
-> Back to the first level.
-
-Footnotes are used to include additional information to the
-document that are not necessary for the understanding of the main
-text. Here is a footnote reference^[Here is the footnote.] and
-another.[^longnote]
-
-[^longnote]: Here's one with multiple blocks.
-
- Subsequent paragraphs are indented to show that they
-belong to the previous footnote.
-
- Some code
-
- The whole paragraph can be indented, or just the first
- line. In this way, multi-paragraph footnotes work like
- multi-paragraph list items.
-
-Citations are used to provide bibliographical references to other
-documents. This is a regular citation~[@borgman03, p. 123]. This is
-an in-text citation: @borgman03\. You can also cite several authors
-at once using both regular~[see @borgman03, p. 123; @greenberg98,
-sec. 3.2; and @thanh01] and in-text citations: @borgman03 [p.123;
-@greenberg98, sec. 3.2; @thanh01].
-
-Code blocks are used to include source code listings into the
-document:
-
- #include <stdio.h>
- #include <unistd.h>
- #include <sys/types.h>
- #include <sys/wait.h>
- // This is a comment
- int main(int argc, char **argv)
- {
- while (--c > 1 && !fork());
- sleep(c = atoi(v[c]));
- printf("%d\n", c);
- wait(0);
- return 0;
- }
-
-There is an alternative syntax for code blocks that allows you to
-specify additional information, such as the language of the source
-code. This information can be used for syntax highlighting:
-
-``` sh
-#!/bin/sh
-fac() {
- if [ "$1" -leq 1 ]; then
- echo 1
- else
- echo $(("$1" * fac $(("$1" - 1))))
- fi
-}
-``````````````
-
-~~~~~~ Ruby
-# Here's a way to empty an array.
-joe = [ 'eggs.', 'some', 'break', 'to', 'Have' ]
-print(joe.pop, " ") while joe.size > 0
-print "\n"
-~~~~~~
-
-\end{markdown*}
-%<*pdftex>
-\shorthandon{-}
-%</pdftex>
-
\chapter{Inserting the bibliography}
After linking a bibliography data\-base files to the document using
the \verb"\"\texttt{thesis\discretionary{-}{}{}setup\{bib\discretionary{=}{=}{=}%
--
GitLab